.300 Lapua Magnum

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: ".300 Lapua Magnum" – news · newspapers · books · scholar · JSTOR (January 2013) (Learn how and when to remove this message)

.300 Lapua Magnum
Type	Rifle
Place of origin	Finland
Production history
Designer	Lapua
Designed	1989
No. built	small batch for C.I.P. registration
Specifications
Parent case	.338 Lapua Magnum
Case type	Rimless, bottleneck
Bullet diameter	7.82 mm (0.308 in)
Neck diameter	8.73 mm (0.344 in)
Shoulder diameter	13.82 mm (0.544 in)
Base diameter	14.91 mm (0.587 in)
Rim diameter	14.93 mm (0.588 in)
Rim thickness	1.52 mm (0.060 in)
Case length	69.73 mm (2.745 in)
Overall length	94.50 mm (3.720 in)
Case capacity	7.34 cm3 (113.3 gr H2O)
Rifling twist	240 mm (1-9.45")
Primer type	Large rifle magnum
Maximum pressure (C.I.P.)	440.00 MPa (63,817 psi)
Ballistic performance
Bullet mass/type Velocity Energy 10.0 g (154 gr) Lapua Scenar BTHP 1,096 m/s (3,600 ft/s) 6,027 J (4,445 ft⋅lbf) 11.0 g (170 gr) Lapua LockBase BTSP 1,040 m/s (3,400 ft/s) 5,986 J (4,415 ft⋅lbf) 12.0 g (185 gr) Lapua Scenar BTHP 1,010 m/s (3,300 ft/s) 6,135 J (4,525 ft⋅lbf) 13.0 g (201 gr) Sierra BTHP 980 m/s (3,200 ft/s) 6,216 J (4,585 ft⋅lbf) 14.0 g (216 gr) Sierra BTHP 950 m/s (3,100 ft/s) 6,406 J (4,725 ft⋅lbf)
Test barrel length: 690 mm (27.2 in) Source(s): AccuLoad [1]

The .300 Lapua Magnum (7.62×70mm) is a rimless, bottlenecked, centerfire cartridge developed for long-range rifles. The parent case of the .300 Lapua Magnum is the .338 Lapua Magnum necked down to a smaller caliber. The .338 cartridge case was selected to withstand high chamber pressures. Combining these high pressures with smaller, lighter bullets than its parent case, .300 Lapua Magnum loadings have high muzzle velocities.

The Finnish ammunition manufacturer Lapua obtained a C.I.P. certification for the .300 Lapua Magnum, so it became an officially registered and sanctioned member of the Finnish 70 mm family of super magnum rifle cartridges. The .300 Lapua Magnum is no longer commercially available. It is still used by a few shooters, who produce the cases from .338 Lapua Magnum cases by reshaping the shoulder and neck, and handloading it with .30 caliber bullets.^[2]

Up to the C.I.P. decisions and tables edition 2007 the .300 Lapua Magnum was rated at 470.00 MPa (68,168 psi) P_max piezo pressure, This very high outdated P_max has been reduced by the C.I.P. since then to 440.00 MPa (63,817 psi) P_max.

The .300 Lapua Magnum's case has a 7.34 mL (113 grains of water) capacity. The exterior shape of the case was designed for reliable case feeding and extraction in bolt-action rifles, semi-automatic and automatic firearms, including under extreme conditions.

.300 Lapua Magnum maximum C.I.P. cartridge dimensions. All sizes in millimeters (mm).

The common rifling twist rate for this cartridge is 240 mm (1 turn in 9.45 inches), with 4 grooves. The diameter of the lands is 7.62 mm; the diameter of the grooves is 7.82 mm. Land width is 4.47 mm and the primer type is large rifle magnum.

According to the C.I.P., the .300 Lapua Magnum can handle up to 440.00 MPa (63,817 psi) P_max piezo pressure. In C.I.P. regulated countries, every rifle and cartridge combination must be proof tested at 125% of the maximum C.I.P. pressure to be certified for sale to consumers.^[3]

The high pressures involved mean that the .300 Lapua Magnum should only be chambered in rifles that are specifically designed for extremely high-powered cartridges. Chambering such powerful super magnum cartridges in rifles intended for normal magnum rifle cartridges and using P_max loads can cause serious or fatal injury to the shooter and bystanders. A rifle that theoretically could safely be chambered for the 94.5 mm long .300 Lapua Magnum is the bolt-action SAKO TRG-42. This rifle was designed for .338 Lapua Magnum cartridges and can handle cartridges up to 95 mm in overall length.

The .300 Lapua Magnum’s main appeal is long-range shooting. Due to the large case capacity in relation to the bore diameter (known as overbore) the .300 Lapua Magnum is harsh on barrels and typically wears them out in 1,000 to 1,500 rounds. Thorough cleaning and avoiding numerous consecutive shots help to minimize barrel wear. This makes this cartridge impractical for most competition and professional long-range shooters, such as military snipers, who tend to fire many rounds in practice to acquire and maintain expert long-range marksmanship.

The 2008 Vihtavuori reloading guide states that, when loaded with heavy .30 caliber bullets and fired out of a 690 mm (27 in) barrel, the .300 Lapua Magnum has lower muzzle energy compared to the .338 Lapua Magnum.^[4]

The belted .30-378 Weatherby Magnum cartridge, introduced in 1996, and the rebated-rim .300 Remington Ultra Magnum cartridge, introduced in 1999, are probably the closest commercially available ballistic equivalents of the .300 Lapua Magnum.

• List of rifle cartridges
• 7 mm caliber
• 7.62mm UKM
• .338 Lapua Magnum

• Cartridge Dimensions - Howell, Ken (1995). Designing and Forming Custom Cartridges. Precision Shooting. p. 217. ISBN 0-9643623-0-9.
• .300 Lapua Magnum cartridge dimensions at Steves Pages
• C.I.P. CD-ROM edition 2003
• C.I.P. decisions, texts and tables (free current C.I.P. CD-ROM version download (ZIP and RAR format))

• Reloading data for the .300 Lapua Magnum cartridge
• QuickLOAD internal ballistics predictor computer program for fire arms
• VihtaVuori Reloading Guide, 2002
• Lutz Möller's .300 Lapua Magnum Page with a computer made image of the cartridge - SOME LOAD SUGGESTIONS EXCEED THE C.I.P. LIMIT (4700 bar)
• C.I.P. TDCC sheet 300 Lapua Mag.