On May 13, 2019, a de Havilland Canada DHC-2 Beaverfloatplane operated by Mountain Air Service collided with a Taquan Airde Havilland Canada DHC-3 Turbine Otter floatplane over George Inlet, Alaska, United States.[1] The DHC-2 broke up in mid-air with the loss of all four passengers and the pilot. The DHC-3 pilot was able to maintain partial control - enough to perform a forced landing on George Inlet - but the aircraft sustained substantial damage in the collision and the landing; the pilot suffered minor injuries, nine passengers suffered serious injuries, and one passenger was killed. Both aircraft were conducting sightseeing flights under visual flight rules, which state that the pilot of each aircraft is responsible for visually ensuring adequate separation from other air traffic, commonly known as "see and avoid".[1][2]
In April 2021, the National Transportation Safety Board (NTSB) attributed the accident to "'the inherent limitations of the see-and-avoid concept, along with the absence of alerts from both airplanes' traffic display systems." Due to the angle of approach, the DHC-2 pilot's view was obscured by the aircraft structure and the passenger sitting in the right-hand seat, while the DHC-2 was blocked from the DHC-3 pilot's view by the left front window post. Both aircraft were equipped with Automatic Dependent Surveillance–Broadcast (ADS-B) traffic alert systems, but the DHC-3 automatic alert feature had been disabled by an equipment change, while the alert features of the DHC-2 system did not trigger because avionics in the DHC-3 were not broadcasting the aircraft's altitude.[2] The NTSB also identified Taquan's inadequate preflight checklist and the Federal Aviation Administration's failure to require Taquan to implement a safety management system as contributing factors.[2][3]
Aircraft and crew
The first accident aircraft was a de Havilland Canada DHC-2 Beaver floatplane, Federal Aviation Administration (FAA) aircraft registration number N952DB, serial number 237, owned and operated by Mountain Air Service LLC since 2012. It was manufactured in 1951, was equipped with Edo floats, and had 16,452 total flight hours at the time of its most recent annual inspection in on April 16, 2019.
The second accident aircraft was a de Havilland Canada DHC-3 Turbine Otter floatplane, FAA number N959PA, serial number 159, manufactured in 1956, owned by Pantechnicon Aviation Ltd. since 2012, and operated by Taquan Air since 2016. It was also equipped with Edo floats, and had logged 30,297 hours of operation at its last annual inspection on April 30, 2019.[1][4][5][2]
The DHC-2 pilot was 46 years old identified as Randy Sullivan. He held a commercial pilot certificate and a flight instructor certificate, ratings for seaplanes with single or multiple engines, and a valid second-class medical certificate with no limitations. His personal flight records could not be located but he had reported around 11,000 flight hours during his last medical exam. He was the owner and sole pilot for Mountain Air Service.[2]
The DHC-3 pilot was 60 years old identified as Lou Beck. He held an airline transport pilot certificate and a flight instructor certificate, a rating for single-engine seaplanes, and a valid first-class medical certificate with a limitation requiring corrective lenses. He had been hired by Taquan Air in 2018 and flew for the airline primarily during the summer months. According to Taquan records, he had about 25,000 flight hours, with about 15,000 hours as pilot-in-command.[2]
Accident
NTSB illustration of the flight paths of N952DB (orange line) and N959PA (pink line) prior to the collision
Both aircraft were returning to Ketchikan Harbor Seaplane Base approximately 7 miles (11 km) southwest. The DHC-2 was flying at 107 knots (123 mph; 198 km/h) at an altitude of about 3,350 feet (1,020 m) mean sea level (MSL) while the DHC-3 was gradually descending at 126 knots (145 mph; 233 km/h) from an altitude of 3,700 feet (1,100 m) MSL. Visual meteorological conditions prevailed. The DHC-3 was equipped with an Automatic dependent surveillance – broadcast (ADS-B) collision warning system, but the pilot did not perceive any ADS-B collision warnings before he saw a "flash" to his left, and the two aircraft collided at 12:21 PM local time at an altitude of about 3,350 feet (1,020 m) MSL.[1][2] One of the passengers in the DHC-3 reportedly saw the other aircraft before the collision and yelled "Pull up! Pull up!" before impact.[2] The collision broke the windshield and separated the left rear door from the DHC-3.[2]
The DHC-2 broke up in mid-air, creating an approximately 2,000-by-1,000-foot (610 by 300 m) debris field about 1.75 miles (2.82 km) southwest of the DHC-3 crash site. The DHC-2 fuselage, empennage, and cabin structure were separated from one another, and the right wing showed damage consistent with propeller impacts. The pilot and all 4 passengers were killed.[1][2]
The DHC-3 pitched about 27 degrees nose down, but the pilot was able to maintain partial control and perform a landing flare before touching down in George Inlet.[1] On landing, the aircraft shuddered violently, the floats separated from the aircraft, and the cabin immediately flooded through the left rear door opening and broken windshield and began to sink.[2][7] The pilot suffered head injuries in the collision and landing but was able to open the right rear door and help passengers exit. The pilot and surviving passengers were rescued by a nearby boater in a small skiff, who immediately called the United States Coast Guard and ferried the survivors to shore before a Coast Guard boat and helicopter arrived. The female passenger in the right front seat was severely injured and was seen motionless and slumped over in her seat as the aircraft sank. She was the only fatality on the DHC-3.[2]
The DHC-3 came to rest under about 80 feet (24 m) of water.[1] The fuselage forward of the bulkhead separating the passenger cabin from the cockpit was found mostly broken away from the rear fuselage, and the left side of the forward fuselage was more heavily damaged than the right side. Two propeller blades were partially broken off, while all three were bent and gouged in a manner consistent with heavy rotational contact with a solid object, and were smeared with white paint.[2]
Casualties
Nine passengers in the DHC-3 sustained serious injuries and one passenger died on the scene, while the pilot of the DHC-3 sustained suffered head trauma during the accident; all four passengers and the pilot in the DHC-2 died on impact.[1] Six injured victims were admitted to a local hospital and four others were evacuated to Seattle.[6]
The bodies of three occupants of the DHC-2 were recovered from the water soon after the accident and the other two bodies were found in a wooded area near the shoreline the following day. The medical examiner determined the cause of death of all five DHC-2 occupants to have been blunt force trauma.[2]
The body of the fatal front-seat passenger in the DHC-3 was found underwater, still strapped into her seat in the aircraft wreckage; her primary cause of death was determined to have been blunt force trauma with drowning being a contributing factor.[2]
Aftermath
Since the deceased DHC-2 pilot was the owner and sole pilot for Mountain Air Service, and the DHC-2 involved was the only aircraft owned by the airline, the company ceased all operations after the crash.[2][8]Taquan Air Flight 20 crashed one week later on 20 May and the airline suspended all flights the following day.[9][10] Amid increased oversight by the FAA, Taquan resumed limited cargo service on 23 May,[11] scheduled passenger flights on 31 May, and on-demand sightseeing tours on June 3.[12]
In a meeting held on April 20, 2021, the NTSB attributed the accident to "'the inherent limitations of the see-and-avoid concept along with the absence of alerts from both airplanes' traffic display systems." The NTSB examined Automatic Dependent Surveillance–Broadcast (ADS-B) aircraft position data, recorded data from the accident aircraft avionics, and photos taken by passengers in the accident aircraft.[2][3] The NTSB found that the DHC-2 had been gradually climbing and had leveled off at an altitude of 3,350 ft (1,020 m) and a heading of about 255°, while the DHC-3 was descending from 4,000 ft (1,200 m) at a track ranging from 224° and 237°.[14] The agency determined that the DHC-2 pilot would have been unable to see the DHC-3 approaching from his right due to the DHC-2 cockpit structure, the right-hand wing, and the passenger sitting in the right-hand front seat, while the left front window post in the DHC-3 obscured the DHC-2 from the pilot's view for 11 seconds leading up to the collision.[2][3]
Both aircraft were equipped with ADS-B based Cockpit Display of Traffic Information (CDTI). However, an FAA-provided equipment upgrade to the Garmin GSL 71 system in the DHC-3, implemented due to the phaseout of the FAA Capstone Program, had disabled the auditory traffic alert feature. Furthermore, the pressure altitude broadcasting feature of the GSL 71 was disabled because the control knob was set to the OFF position, and the Taquan Air preflight checklist (which listed the name of a different operator) did not require the pilot to set the knob to the appropriate position to broadcast pressure altitude. According to data records examined by the NTSB, the DHC-3 had not broadcast pressure altitude since April 29, 2019.[2] The absence of pressure altitude broadcasts effectively disabled the automatic alert features in the ForeFlight mobile app CDTI used by the DHC-2 pilot, which was not designed to provide alerts when the target aircraft is not broadcasting pressure altitude. The lack of dedicated auditory or visual warnings left both pilots dependent on visually checking their CDTI display screens periodically.[14][2]
The NTSB recommended that the FAA require Part 135 operators to implement safety management systems, which could have mitigated the lack of alerting capability of the CDTI in the Taquan DHC-3, and prompted the airline to update its preflight checklist to include appropriate CDTI settings. Additionally, the NTSB recommended that ForeFlight upgrade their software such that automatic alerts are provided by default when the target aircraft is not broadcasting pressure altitude.[14][2]
In popular culture
The incident is featured in season 24 of the Canadian documentary series Mayday, titled "Without Warning".[15]
.jpg)
