40th Street–Lowery Street station

40 Street–Lowery Street
New York City Subway station (rapid transit)
Station statistics
Address	40th Street & Queens Boulevard Sunnyside, New York
Borough	Queens
Locale	Sunnyside
Coordinates	40°44′37.72″N 73°55′27.04″W / 40.7438111°N 73.9241778°W / 40.7438111; -73.9241778
Division	A (IRT)[1]
Line	IRT Flushing Line
Services	7  (all times)
Transit	NYCT Bus: Q32 MTA Bus: Q60
Structure	Elevated
Platforms	2 side platforms
Tracks	3
Other information
Opened	April 21, 1917; 107 years ago (1917-04-21)
Opposite- direction transfer	No
Former/other names	Lowery Street
Traffic
2023	2,189,736[2]  8.7%
Rank	150 out of 423[2]
Services Preceding station New York City Subway Following station 33rd Street–Rawson Street toward 34th Street–Hudson Yards Local 46th Street–Bliss Street toward Flushing–Main Street does not stop here
Location Show map of New York City Subway Show map of New York City Show map of New York
Track layout Legend to 46th Street–Bliss Street to 33rd Street–Rawson Street
Street map
Station service legend Symbol Description Stops all times

The 40th Street–Lowery Street station (announced as simply 40th Street station on trains) is a local station on the IRT Flushing Line of the New York City Subway. It is served by the 7 local train at all times.

The 1913 Dual Contracts called for the Interborough Rapid Transit Company (IRT) and Brooklyn Rapid Transit Company (BRT; later Brooklyn–Manhattan Transit Corporation, or BMT) to build new lines in Brooklyn, Queens, and the Bronx. Queens did not receive many new IRT and BRT lines compared to Brooklyn and the Bronx, since the city's Public Service Commission (PSC) wanted to alleviate subway crowding in the other two boroughs first before building in Queens, which was relatively undeveloped. The IRT Flushing Line was to be one of two Dual Contracts lines in the borough, along with the Astoria Line; it would connect Flushing and Long Island City, two of Queens's oldest settlements, to Manhattan via the Steinway Tunnel. When the majority of the line was built in the early 1910s, most of the route went through undeveloped land, and Roosevelt Avenue had not been constructed.^[3]: 47 Community leaders advocated for more Dual Contracts lines to be built in Queens to allow development there.^[4]

The Flushing Line was opened from Queensboro Plaza to Alburtis Avenue (now 103rd Street–Corona Plaza) on April 21, 1917, with a local station at 40th Street.^[5]

The city government took over the IRT's operations on June 12, 1940.^[6][7] The IRT routes were given numbered designations in 1948 with the introduction of "R-type" rolling stock, which contained rollsigns with numbered designations for each service.^[8] The route from Times Square to Flushing became known as the 7.^[9] On October 17, 1949, the joint BMT/IRT operation of the Flushing Line ended, and the line became the responsibility of the IRT.^[10] After the end of BMT/IRT dual service, the New York City Board of Transportation announced that the Flushing Line platforms would be lengthened to 11 IRT car lengths; the platforms were only able to fit nine 51-foot-long IRT cars beforehand.^[11][12] The platforms at the station were extended in 1955–1956 to accommodate 11-car trains.^[13] However, nine-car trains continued to run on the 7 route until 1962, when they were extended to ten cars.^[14] With the opening of the 1964 New York World's Fair, trains were lengthened to eleven cars.^[15][16]

The present-day 33rd, 40th, and 46th Streets were originally respectively known as Rawson, Lowery, and Bliss Streets until the 1930s, when they were given numbered street names.^[17] To avoid confusion, the 33rd Street–Rawson Street, 40th Street–Lowery Street, and 46th Street–Bliss Street stations displayed both the new and old names of the respective street.^[18] Since a New York City Transit Authority rule prohibited subway stations from being named after nonexistent streets, the Metropolitan Transportation Authority (MTA) removed the old names of each street from station signs and subway maps in 1998. Local residents opposed the renaming and unsuccessfully attempted to persuade the MTA to restore the old names. The New York City Council passed a law in July 2003, giving both the old and new names to all three streets; after new street signs were installed in September 2003, the MTA agreed to restore the old names of each station.^[17]

Platform level
	Side platform
	Southbound local	← toward 34th Street–Hudson Yards (33rd Street–Rawson Street)
	Peak-direction express	← AM rush does not stop here ← PM rush/evenings does not stop here →
	Northbound local	→ toward Flushing–Main Street (46th Street–Bliss Street) →
	Side platform
Mezzanine		Fare control, station agent, MetroCard and OMNY machines
Ground	Street level	Entrances/exits

The station has two side platforms and three tracks. The center track is used by peak-direction <7> express trains during rush hours.

The 1999 artwork featured at the station is called Q is for Queens by Yumi Heo.

The exit is under the tracks in the median of Queens Boulevard. The exit is at 40th Street with two stairs from each platform. Since fare control is on different sides of the exit, there is no free transfer between directions, although the station's layout could allow one.^[19] This makes the station one of only two stations along the 7 (the other being Vernon Boulevard–Jackson Avenue) to not have a crossover or crossunder, as well as the only elevated station on the line that does not allow for free transfers between directions.

• Media related to 40th Street – Lowery Street (IRT Flushing Line) at Wikimedia Commons
• nycsubway.org – IRT Flushing Line: 40th Street/Lowery Street
• Station Reporter — 7 Train
• The Subway Nut — 40th Street–Lowery Street Pictures Archived September 24, 2019, at the Wayback Machine
• MTA's Arts For Transit — 40th Street–Lowery Street (IRT Flushing Line)
• 40th Street entrance from Google Maps Street View
• Platforms from Google Maps Street View