Dolby Atmos is a surround sound technology developed by Dolby Laboratories. It expands on existing surround sound systems by adding height channels, interpreted as three-dimensional objects with neither horizontal nor vertical limitations.[1][2] Following the release of Atmos for the cinema market, a variety of consumer technologies have been released under the Atmos brand. The initial cinema Atmos systems used in-ceiling speakers, then upward-firing speakers (e.g. for soundbars) were introduced as an alternative for consumer products.[3] Atmos is also used on some devices that do not have a height channel, such as headphones, televisions, mobile phones, and tablets.[4][5][6]
History
The first Dolby Atmos installation was in the El Capitan Theatre in Los Angeles, for the premiere of Brave in June 2012.[7] Throughout 2012, it saw a limited release of about 25 installations worldwide, with an increase to more than 300 locations in 2013.[8] As of October 2022, there were over 10,000 Dolby Atmos enabled cinema screens, installed, or committed to.[9] Dolby Atmos has also been adapted to a home theater format and is the audio component of Dolby Cinema.[10] Electronic devices from 2016 onwards, along with smartphones starting in 2017, have included support for Dolby Atmos recording and mixing capabilities. The full set of technical specifications for Dolby Digital Plus with Dolby Atmos are standardized and published in ETSI TS 103 420.[11]
In 2016 Power was the first television show natively mixed and broadcast in Atmos for its third season, though in the same year, Game of Thrones up-mixed their previous 5.1 presentations for the Blu-ray reissue.[12]R.E.M.'s 1992 album Automatic for the People was the first major music release with its 25th anniversary reissue in 2017.[13]
In 2022, Dolby Atmos partnered with NetEase to offer spatial audio to the Chinese music streaming market. The partnership will entail NetEase to implement Atmos support on compatible smartphones and vehicles.[14]
Technology
Dolby Atmos technology allows the storage and distribution of 128 audio tracks with metadata describing sound properties such as position and volume (and their variation over time). The audio mix is rendered specifically for the theater's setup using the loudspeakers available.[15] Each audio track can be assigned to an audio channel, the conventional format for distribution, or to an audio "object". Dolby Atmos in theaters has a 9.1 (commonly referred to as 7.1.2) channel-based "bed" channels for ambience stems or center dialogue, leaving 118 tracks for objects.[16] Atmos for home in film, television, and music uses a technique called "spatial coding" to reduce the audio to up to a maximum of 16 concurrent "elements" or audio location clusters, that adapt to the content dynamically.[17] In Atmos games ISF (Intermediate Spatial format) is used, which supports 32 total active objects (using a 7.1.4 bed, 20 additional dynamic objects can be active).[18] Each object specifies its apparent source location in the theater as a set of three-dimensional rectangular coordinates relative to the defined audio channel locations and theater boundaries.[19]
Dolby Atmos home theaters can be built upon conventional 5.1 and 7.1 layouts. For Dolby Atmos, the nomenclature differs slightly by an additional number at the end, that represents the number of overhead or Dolby Atmos enabled speakers: a 7.1.4 Dolby Atmos system is a conventional 7.1 layout with four overhead or Dolby Atmos enabled speakers.[20][21] The simplest Dolby Atmos setup is 3.1.2,[22] the most complex one is 24.1.10.[15]
The Dolby Atmos sound system consists of a compatible speaker system, a TV or AV media player, and an AV receiver (or preprocessor), with a Dolby Atmos object audio renderer. During playback, each theater's Dolby Atmos system renders the audio objects in real time based on the known locations of the loudspeakers present in the target theater, such that each audio object is heard as originating from its designated set of coordinates.[15] By way of contrast, conventional multichannel technology essentially burns all the source audio tracks into a fixed number of channels during post-production. This has conventionally forced the re-recording mixer to make assumptions about the playback environment that may not apply very well to a particular theater. The addition of audio objects allows the mixer to be more creative, to bring more sounds off the screen, and be confident of the results.[24]
The first-generation cinema hardware, the "Dolby Atmos Cinema Processor", supports up to 128 discrete audio tracks and up to 64 unique speaker feeds.[25]
The technology was initially created for commercial cinema applications, and was later adapted to home cinema.[26][27] In addition to playing back a standard 5.1 or 7.1 mix using loudspeakers grouped into arrays, the Dolby Atmos system can also give each loudspeaker its own unique feed based on its exact location, thereby enabling many new front, surround, and even ceiling-mounted height channels for the precise panning of select sounds such as a helicopter or rain.[24]
In June 2014, Dolby Laboratories' hardware partners announced the introduction of Dolby Atmos technology for home theaters[28] Following this announcement, Dolby Atmos-enabled movies became accessible through Kaleidescape's movie players.[29][30] A public demonstration of Dolby Atmos in a home theater setting took place during the CEDIA Expo 2014, utilizing a Trinnov Audio Altitude 32 processor.[31]
Several audio equipment manufacturers, including Denon, Marantz, Onkyo, Pioneer, and Yamaha introduced products compatible with Dolby Atmos, ranging from high-end home cinema receivers and preamplifiers to mid-range home-theater-in-a-box (HTiB) packages.[32][33][34][35][36][37] On June 4, 2018, it was announced by Apple that tvOS12 for Apple TV 4K would support Dolby Atmos when released in fall 2018.[38]
Dolby Atmos-enabled speakers are available in two configurations:
Integrated speakers: These combine traditional front-firing speakers with Dolby Atmos-enabled up-firing speakers within a single cabinet.
Add-on modules: These are separate Dolby Atmos-enabled up-firing speakers designed to be placed on top of or within close proximity (up to 3 feet or 0.91 meters) of existing speakers.
Implementation and differences from commercial implementations
Dolby Atmos for Music, an audio-only iteration of the format was adopted by streaming music services Tidal (uses E-AC3) and Amazon Music in December 2019.[45]
Sennheiser launched a new sound bar with built-in Dolby Atmos technology named AMBEO sound bar at the 2019 CES in Las Vegas.[46] The sound bar utilizes analysis of a room's reflective characteristics to enable a single-unit 5.1.4 setup.[47]
On May 17, 2021, Apple Music announced the addition of spatial audio with support for Dolby Atmos and lossless audio.[48] The feature was introduced to Apple Music users on Apple devices starting from June 7, 2021.[49] Dolby Atmos is now fully supported on Android with Windows support coming in the future.[50]
The application of Atmos in home theatres differs from cinemas primarily because of restricted bandwidth and a shortfall in processing power. A spatially-coded sub-stream is added to Dolby TrueHD or Dolby Digital Plus or is present as metadata in Dolby MAT 2.0, an LPCM-like format. This sub-stream is an efficient representation of the full, original object-based mix. This is not a matrix-encoded channel, but a spatially-encoded digital signal with panning metadata. Atmos in home theaters can support 24.1.10 channels[15][51] and uses the spatially-encoded object audio sub-stream to mix the audio presentation to match the installed speaker configuration. There are programs from Dolby that handle 128 objects (including 118 dynamic objects and 10 beds) for macOS and Windows.[52]
To reduce the bit rate in Dolby Atmos, nearby objects and speakers are grouped into clusters known as aggregate objects, which are then dynamically panned through a process referred to as spatial coding by Dolby.[53] The audio from the original objects can be distributed across multiple aggregate objects to preserve the original objects' sound power and position. Filmmakers have control over the spatial resolution and the degree of clustering when using the Dolby Atmos Production Suite tools. Additionally, Dolby Digital Plus has been updated to include Atmos extensions.[16]
Headphones
Dolby Atmos also has headphone implementations for PCs, the Xbox One, the Xbox Series X/S, and mobile phones. They work by using audio processing algorithms to convert the Atmos object metadata into a binaural 360° output using the usual two headphone speakers. This technique is an improvement on the previous Dolby Headphone technology, allowing infinite channels of sound to be processed into a virtual surround experience.[54]
Windows 10version 1703 ("Creators Update") added platform-level support for spatial sound processing, including Windows Sonic for Headphones and Dolby Atmos for Headphones.[55] Dolby Atmos for headphones requires a license to function which can be purchased or redeemed inside the Dolby Access app. Some branded headphones designed explicitly to deliver better audio quality exist, but users can use their normal headphones or earphones so long as the decoding device uses Atmos, or the audio track itself has been previously downmixed.[citation needed]
With the release of third-generation AirPods in October 2021, Apple added support for Dolby Atmos, branded Spatial Audio, to all AirPods (including earlier hardware generations), AirPods Pro, AirPods Max, and most headphones marketed under the Beats brand.[56]
NIO ET7 comes standard with Dolby Atmos. On November 16, 2021, NIO announced that Dolby Atmos will be standardized on all NIO ET7s, the smart flagship electric sedan of the company, combined with a 7.1.4 immersive sound system.[59][60]
Dolby's first implementation of Atmos in an automobile will be the Lucid Air sedan from Lucid Motors.[61]
Compatibility
Dolby Atmos is adaptable and can be played back on various speaker setups. As well, many audio products provide additional support for Dolby Atmos.[62]
The technology has been licensed to other brands by Dolby. Since its launch, the Dolby Atmos format has been used by/affiliated with several companies in consumer technology as well as major film productions. This has added to the overall availability of content for Dolby Atmos' users.[2]
^"Sennheiser CES 2019". www.en-de.sennheiser.com. Archived from the original on September 2, 2023. Retrieved December 21, 2018. At CES 2019, held in Las Vegas from January 8 to 11, Sennheiser will be providing visitors with the unique opportunity to explore the world of Augmented Audio and craft their very own AMBEO AR experience.
^"Sennheiser AMBEO Soundbar". Archived from the original on October 15, 2020. Retrieved October 8, 2020. By capturing the characteristics of your living room and reflective surfaces, and using the latest virtualization technology developed with Fraunhofer, the AMBEO Soundbar merges with the acoustics of your environment to create a 3D sound experience.