Erwin Leo Himmel

Erwin Leo Himmel (born April 9, 1956 in Graz, Austria) is an Austrian automobile designer.

Background

Born as the second of two sons in 1956, Erwin Leo Himmel grew up in Leibnitz, Austria. After finishing high school, he started to study architecture at the Graz University of Technology. In the second year of his studies, he read an article about automobile design, where he recognized the existence of the profession of an automobile designer. While studying further he taught himself to sketch cars by copying drawings he found in magazines. He trained himself for more than one year and became freer and freer in his style. After preparing a portfolio of his own designs, he applied for a job as an automobile designer in Germany. Getting accepted by Audi, Ford, and Volkswagen, Himmel decided to quit his studies and took the job at Audi. The former chief designer of Audi Hartmut Warkuss saw his talent and potential immediately and offered him a scholarship for the Royal College of Art in London, the international elite college in design. Himmel attended the full two-year master program and graduated in 1981 as ‘Master of Design’. These years in London, where he got to know people such as Raymond Loewy, were one of the most influencing times in his life.

Automotive design

Audi, 1982–1994

After graduating he came back to the design centre of Audi in Ingolstadt, Germany, and started his career. Himmel was responsible for virtually the entire range of models from the mid-1980s to the mid-1990s, like the Audi 80 Sedan, Avant, Coupe and Cabriolet, Audi 100 Sedan and Avant, and the Audi V8. In this creative environment he enjoyed working together with other designers such as J Mays and Peter Schreyer. In 1990, he became Director of Audi’s Munich-based design studio where he had the idea to develop a new concept. A design icon was born: the Audi Quattro Spyder, the highlight of the “Frankfurt IAA” in 1991 and a milestone in the design history of Audi.

Design Centre Europe, 1995–1999

In 1994, Erwin Leo Himmel realizing the establishment of the first external design centre of the whole Volkswagen Group in Europe. After a long process of searching, the strategic choice of location fell on Barcelona, Spain. A suitable piece of land was found in Sitges, a seaside town next to Barcelona. Himmel was responsible for the planning and realization of the newly built 130-people design facility, which was named “DCE – Design Centre Europe”. He worked there for Audi, Volkswagen, SEAT and Skoda. Such successful designs as the Audi A8, S3 and RS4, and Volkswagen Touareg, Touran and essential parts of Golf IV and Phaeton were created.

Fuore Design, 2000–2007

At the end of 1999, Himmel was offered the position of chief designer at Skoda, but he decided instead to start his own business. And so he founded the independent 35-people design studio “Fuore Design” in the heart of Barcelona. Beside the core business of automotive design, he specialized in brand consulting.

He consulted Mitsubishi in their process of finding a new design language, and created the two concept cars, the Mitsubishi Pajero Evolution and Pajero Evolution 2+2, which were presented at the 2001 “Frankfurt IAA” and the 2002 “Geneva Salon International de l’Auto”. After the great feedback at the shows, Himmel was also responsible for the design development of the Dakar Rally multiple-champion racing car Mitsubishi Pajero Evolution.

Subaru had a strategic relationship with Fuore. Himmel developed a new brand design strategy. His concept car Subaru B11S showed the new philosophy at the 2003 “Geneva Salon International de l’Auto”. The current models Subaru R1, R2 and B9 Tribeca were created by him, too. With the ‘XF 10’ and the ‘BlackJag’, Himmel presented his first self-developed show cars at the 2003 “Barcelona Salón Internacional del Automóvil” and the 2004 “Geneva Salon International de l’Auto”. Himmel worked for almost every leading corporate group in the automotive sector. After a hard year in 2006 and a bad forecast of incoming contracts in 2007, Himmel did not see a good enough economic perspective to continue and decided to sell the company at the middle of 2007.

Hispano Suiza Automobilmanufaktur AG, from 2008

After selling Fuore Design in 2007, Erwin Leo Himmel dedicated himself to his dream goal of owning his own car brand in the luxury segment. After years of research and his activities in Barcelona, he noticed the historic automobile brand Hispano Suiza. Since the brand became free after decades of inactivity, Erwin Leo Himmel registered this brand in a few countries where the Hispano Suiza founding family Suqué Mateu did not renew the name registration and tried to bring it back to life.

In 2019 Erwin Leo Himmel expanded Hispano Suiza with its own division for alternative drive technologies in the hydrogen sector. Since then, this department has been developing a further vehicle model with a hydrogen drive in addition to the conventional model with a combustion engine.

Bankruptcy

In February 2022 the Hispano Suiza Engineering GmbH, of which Mr. Himmel was the Managing Director, declared bankruptcy with total debts of €4,7 Mio. against estimated assets of €42.800.^[1]

Industrial design

In his time at Fuore, Himmel made a lot of industrial design, too. Panasonic signed a strategic relationship with Fuore. Out of it, Himmel created such things as a cell-phone, an mp3-player, a home cinema system, a telephone, an air conditioner and other white goods for Panasonic. He also worked for companies such as LG and Samsung. Another field was transportation design, especially the exterior and interior design of trains. For example, Himmel developed the design of a new high-speed train for Talgo. He also designed interiors of airplanes. His ‘biggest’ project was a cruise liner for an American ocean carrier. Furthermore, he also did a lot of work in the motorcycle industry. He designed nearly every kind of size, from the scooter up to the superbike, including the development of a new design language for the world’s biggest motorcycle producer Honda. A great pleasure for him was the work for the luxury industry, especially for TAG Heuer. Moreover, he designed a bath ceramic series, for example for Roca.

All these products gave Himmel the chance to broaden his horizon in design and marketing, concerning new markets, customers and their mentalities. With the new impressions, it was also possible for him to optimize the processes in the design development, including a faster and more efficient way in automobile design.

“Auto”-biography

Launch	Vehicle	Production period
1986	Audi 80 Sedan (B3)	1986-1991
1987	Audi 90 Sedan (B3)	1987-1991
1988	Audi V8 quattro (D11)	1988-1994
1988	Audi Coupé (B3)	1988-1996
1990	Audi 100 Sedan (C4)	1990-1997
1991	Audi 80 Sedan (B4)	1991-1994
1991	Audi Cabriolet (Type 89)	1991-2000
1991	Audi 100 Avant (C4)	1991-1998
1992	Audi 80 Avant (B4)	1992-1995
1997	Volkswagen Golf IV (1J)	1997-2003
1999	Audi S3 (8L)	1999-2003
1999	SEAT Ibiza (6K GP01)	1999-2002
2000	Audi RS4 (B5)	2000-2002
2002	Audi A8 (D3)	2002-today
2002	Volkswagen Touareg	2002-today
2002	Volkswagen Phaeton	2002-today
2003	Volkswagen Touran	2003-today
2003	Subaru R2	2003-today
2005	Subaru B9 Tribeca	2005-today
2005	Subaru R1	2005-today
2021	Maguari HS1 GTC	2021-today

Concept cars

Year	Concept car	Show
1991	Audi Quattro Spyder	Frankfurt IAA
1998	SEAT Bolero	Geneva Salon International de l’Auto
1999	SEAT Formula	Geneva Salon International de l’Auto
2001	Mitsubishi Pajero Evolution	Frankfurt IAA
2002	Mitsubishi Pajero Evolution 2+2	Geneva Salon International de l’Auto
2003	Subaru B11S	Geneva Salon International de l’Auto
2003	Fuore XF10	Barcelona Salón Internacional del Automóvil
2004	Fuore BlackJag	Geneva Salon International de l’Auto
2010	Hispano Suiza Grand Turismo	Geneva Salon International de l’Auto