Share to: share facebook share twitter share wa share telegram print page

Molecular sieve

Typical molecular sieves are of the LTA type. They feature sodium aluminosilicates cages (sodium not shown) that have high affinity for water.
Vials of mesoporous silica

A molecular sieve is a material with pores (voids or holes), having uniform size comparable to that of individual molecules, linking the interior of the solid to its exterior. These materials embody the molecular sieve effect, the preferential sieving of molecules larger than the pores.[a] Many kinds of materials exhibit some molecular sieves, but zeolites dominate the field. Zeolites are almost always aluminosilicates, or variants where some or all of the Si or Al centers are replaced by similarly charged elements.[2]

Sieving process

The diameters of the pores that comprise molecular sieves are similar in size to small molecules. Large molecules cannot enter or be adsorbed, while smaller molecules can. As a mixture of molecules migrates through the stationary bed of porous, semi-solid substance referred to as a sieve (or matrix), the components of the highest molecular weight (which are unable to pass into the molecular pores) leave the bed first, followed by successively smaller molecules. Most of molecular sieves are aluminosilicates (zeolites) with Si/Al molar ratio less than 2, but there are also examples of activated charcoal and silica gel.[2][3][4]

The pore diameter of a molecular sieve is measured in ångströms (Å) or nanometres (nm). According to IUPAC notation, microporous materials have pore diameters of less than 2 nm (20 Å) and macroporous materials have pore diameters of greater than 50 nm (500 Å); the mesoporous category thus lies in the middle with pore diameters between 2 and 50 nm (20–500 Å).[5]


The sieving properties of molecular sieves are classified as

Applications

Some molecular sieves are used in size-exclusion chromatography, a separation technique that sorts molecules based on their size.

Another important use is as a desiccant. They are often utilized in the petrochemical industry for drying gas streams. For example, in the liquid natural gas (LNG) industry, the water content of the gas needs to be reduced to less than 1 ppmv to prevent blockages caused by ice or methane clathrate.

Laboratory use

In the laboratory, molecular sieves are used to dry solvent. "Sieves" have proven to be superior to traditional drying techniques, which often employ aggressive desiccants.[7]

Under the term zeolites, molecular sieves are used for a wide range of catalytic applications. They catalyze isomerisation, alkylation, and epoxidation, and are used in large scale industrial processes, including hydrocracking and fluid catalytic cracking.[8]

They are also used in the filtration of air supplies for breathing apparatus, for example those used by scuba divers and firefighters. In such applications, air is supplied by an air compressor and is passed through a cartridge filter which, depending on the application, is filled with molecular sieve and/or activated carbon, finally being used to charge breathing air tanks.[9] Such filtration can remove particulates and compressor exhaust products from the breathing air supply.

FDA approval

The U.S. FDA has as of April 1, 2012, approved sodium aluminosilicate for direct contact with consumable items under 21 CFR 182.2727.[10] Prior to this approval the European Union had used molecular sieves with pharmaceuticals and independent testing suggested that molecular sieves meet all government requirements but the industry had been unwilling to fund the expensive testing required for government approval.[11]

Regeneration

Methods for regeneration of molecular sieves include pressure change (as in oxygen concentrators), heating and purging with a carrier gas (as when used in ethanol dehydration), or heating under high vacuum. Regeneration temperatures range from 175 °C (350 °F) to 315 °C (600 °F) depending on molecular sieve type.[12] In contrast, silica gel can be regenerated by heating it in a regular oven to 120 °C (250 °F) for two hours. However, some types of silica gel will "pop" when exposed to enough water. This is caused by breakage of the silica spheres when contacting the water.[13]

Adsorption capabilities

Name Alias Pore diameter (Ångström) Bulk density (g/mL) Adsorbed water (% w/w) Attrition or abrasion, W (% w/w) Usage[14]
3A A-3, K-A 3 0.60–0.68 19–20 0.3–0.6 Desiccation of petroleum cracking gas and alkenes, selective adsorption of H2O in insulated glass (IG) and polyurethane, drying of ethanol fuel for blending with gasoline.
4A A-4, Na-A 4 0.60–0.65 20–21 0.3–0.6 Adsorption of water in sodium aluminosilicate which is FDA approved (see below) used as molecular sieve in medical containers to keep contents dry and as food additive having E-number E-554 (anti-caking agent); Preferred for static dehydration in closed liquid or gas systems, e.g., in packaging of drugs, electric components and perishable chemicals; water scavenging in printing and plastics systems and drying saturated hydrocarbon streams. Adsorbed species include SO2, CO2, H2S, C2H4, C2H6, and C3H6. Generally considered a universal drying agent in polar and nonpolar media;[12] separation of natural gas and alkenes, adsorption of water in non-nitrogen sensitive polyurethane
5A-DW 5 0.45–0.50 21–22 0.3–0.6 Degreasing and pour point depression of aviation kerosene and diesel, and alkenes separation
5A small oxygen-enriched 5 0.4–0.8 ≥23 Specially designed for medical or healthy oxygen generator[citation needed]
5A A-5, Ca-A 5 0.60–0.65 20–21 0.3–0.5 Desiccation and purification of air; dehydration and desulfurization of natural gas and liquid petroleum gas; oxygen and hydrogen production by pressure swing adsorption process
10X F-9, Ca-X 8 0.50–0.60 23–24 0.3–0.6 High-efficient sorption, used in desiccation, decarburization, desulfurization of gas and liquids and separation of aromatic hydrocarbon
13X F-9, Na-X 10 0.55–0.65 23–24 0.3–0.5 Desiccation, desulfurization and purification of petroleum gas and natural gas
13X-AS 10 0.55–0.65 23–24 0.3–0.5 Decarburization and desiccation in the air separation industry, separation of nitrogen from oxygen in oxygen concentrators
Cu-13X Cu-X 10 0.50–0.60 23–24 0.3–0.5 Sweetening (removal of thiols) of aviation fuel and corresponding liquid hydrocarbons

3A

  • Approximate chemical formula: ((K2O)2⁄3 (Na2O)1⁄3) • Al2O3• 2 SiO2 • 9/2 H2O
  • Silica-alumina ratio: SiO2/ Al2O3≈2

Production

3A molecular sieves are produced by cation exchange of potassium for sodium in 4A molecular sieves (See below)

Usage

3A molecular sieves do not adsorb molecules with diameters are larger than 3 Å. The characteristics of these molecular sieves include fast adsorption speed, frequent regeneration ability, good crushing resistance and pollution resistance. These features can improve both the efficiency and lifetime of the sieve. 3A molecular sieves are the necessary desiccant in petroleum and chemical industries for refining oil, polymerization, and chemical gas-liquid depth drying.

3A molecular sieves are used to dry a range of materials, such as ethanol, air, refrigerants, natural gas and unsaturated hydrocarbons. The latter include cracking gas, acetylene, ethylene, propylene and butadiene. 3A molecular sieves are stored at room temperature, with a relative humidity not more than 90%. They are sealed under reduced pressure, being kept away from water, acids and alkalis.

4A

  • Chemical formula: Na2O•Al2O3•2SiO2•9/2H2O
  • Silicon-aluminium ratio: 1:1 (SiO2/ Al2O3≈2)

Production

For the production of 4A sieve, typically aqueous solutions of sodium silicate and sodium aluminate are combined at 80 °C. The product is "activated" by "heating" at 400 °C[15] 4A sieves serve as the precursor to 3A and 5A sieves through cation exchange of sodium for potassium (for 3A) or calcium (for 5A)[16][17]

Uses

The main use of zeolitic molecular sieves is in laundry detergents. In 2001, an estimated 1200 kilotons of zeolite A were produced for this purpose, which entails water softening.[2]

4A molecular sieves are widely used to dry laboratory solvents.[7] They can absorb water and other species with a critical diameter less than 4 Å such as NH3, H2S, SO2, CO2, C2H5OH, C2H6, and C2H4.

Bottle of 4A molecular sieves

Some molecular sieves are used to assist detergents as they can produce demineralized water through calcium ion exchange, remove and prevent the deposition of dirt. They are widely used to replace phosphorus. The 4A molecular sieve plays a major role to replace sodium tripolyphosphate as detergent auxiliary in order to mitigate the environmental impact of the detergent. It also can be used as a soap forming agent and in toothpaste.

Other purposes

  1. The metallurgical industry: separating agent, separation, extraction of brine potassium, rubidium, caesium, etc.
  2. Petrochemical industry, catalyst, desiccant, adsorbent
  3. Agriculture: soil conditioner
  4. Medicine: load silver zeolite antibacterial agent.

Morphology of molecular sieves

Molecular sieves are available in diverse shape and sizes. Spherical beads have advantage over other shapes as they offer lower pressure drop and are mechanically robust.

See also

Notes

  1. ^ "With respect to porous solids, the surface associated with pores communicating with the outside space may be called the internal surface. Because the accessibility of pores may depend on the size of the fluid molecules, the extent of the internal surface may depend on the size of the molecules comprising the fluid, and may be different for the various components of a fluid mixture."[1]

References

  1. ^ "Molecular Sieve Effect". IUPAC GoldBook.
  2. ^ a b c Kresge, Charles T.; Dhingra, Sandeep S. (2004). "Molecular Sieves". Kirk-Othmer Encyclopedia of Chemical Technology. doi:10.1002/0471238961.1315120511210812.a01.pub2. ISBN 978-0-471-48494-3.
  3. ^ Mazur, Michal; Přech, Jan; Čejka, Jiří (2019). "Zeolites and Other Micro- and Mesoporous Molecular Sieves". Kirk-Othmer Encyclopedia of Chemical Technology. pp. 1–36. doi:10.1002/0471238961.zeolcejk.a01.pub2. ISBN 978-0-471-48494-3.
  4. ^ Cohen, Alan P. (2003). "Desiccants". Kirk-Othmer Encyclopedia of Chemical Technology. doi:10.1002/0471238961.0405190903150805.a01.pub2. ISBN 978-0-471-48494-3.
  5. ^ J. Rouquerol; et al. (1994). "Recommendations for the characterization of porous solids (Technical Report)" (free download pdf). Pure Appl. Chem. 66 (8): 1739–1758. doi:10.1351/pac199466081739. S2CID 18789898.
  6. ^ "Desiccant Types". SorbentSystems.com. Retrieved 2014-02-26.
  7. ^ a b Williams, D. B. G., Lawton, M., "Drying of Organic Solvents: Quantitative Evaluation of the Efficiency of Several Desiccants", The Journal of Organic Chemistry 2010, vol. 75, 8351. doi:10.1021/jo101589h
  8. ^ Pujadó, P. R.; Rabó, J. A.; Antos, G. J.; Gembicki, S. A. (1992-03-11). "Industrial catalytic applications of molecular sieves". Catalysis Today. 13 (1): 113–141. doi:10.1016/0920-5861(92)80191-O.
  9. ^ [1] Archived April 16, 2012, at the Wayback Machine
  10. ^ "Sec. 182.2727 Sodium aluminosilicate". U.S. Food and Drug Administration. 1 April 2012. Retrieved 10 December 2012.
  11. ^ "Molecular Sieve Desiccant". DesiccantPacks.net. Retrieved 2014-02-26.
  12. ^ a b "Molecular Sieves". Sigma-Aldrich. Retrieved 2014-02-26.
  13. ^ Spence Konde, "Preparation of High-Silica Zeolite Beads From Silica Gel," retrieved 2011-09-26
  14. ^ "Molecular Sieve, Yiyuan Molecular Sieves". Chemicalpackingcorp.com. Retrieved 2014-02-26.
  15. ^ US 3433588, Max Michel & Denis Papee, "Method for the preparation of 4 angstrom unit zeolites", published 1969-03-18, issued 1969-03-18 
  16. ^ Zeochem
  17. ^ Intraglobal
Scholia has a topic profile for Molecular sieve.
Kembali kehalaman sebelumnya