A regional airliner or a feeder liner is a small airliner that is designed to fly up to 100 passengers on short-haul flights, usually feeding larger carriers' airline hubs from small markets. This class of airliners is typically flown by the regional airlines that are either contracted by or subsidiaries of the larger airlines. Regional airliners are used for short trips between smaller towns or from a larger city to a smaller city. Feeder liner, commuter, and local service are all alternative terms for the same class of flight operations.[1]
History
To keep short routes economical, airlines preferred using second hand aircraft than costlier new aircraft.[1] Older aircraft were put into short haul service as they were replaced by new longer-range designs.
The first piston-powered airliners with 40 seats were the Martin 2-0-2s (introduced in 1947) and Convair CV-240s (1948).
Turboprop designs
The first turboprop powered aircraft emerged like the Vickers Viscount (75 seats, introduced in 1953) and Fokker F27 (44–52 seats, 1958). Some smaller turboprop airliners were developed in the 1960s like the British Shorts Skyvan (19 seats, 1963), and French Nord 262 (29 seats, 1964) or Brazilian Embraer EMB 110 Bandeirante (1973). This "hand-me-down" process of supplying aircraft continued with designs like the Convair 440 and Douglas DC-6 also serving in this role while the first jets were introduced.
By the mid-1950s, demand for even more economical designs led to the production of the first custom feeder liners. These were almost always turboprops, which had fuel economy on par with piston engine designs, but had far lower maintenance costs. Often, the time between engine overhaul periods was five times that of the best piston engines. Early examples of these designs include the Fokker F27 Friendship, Avro 748, and Handley Page Dart Herald.
These designs were so successful that it was to be many years before newer designs bettered them enough to make it worthwhile in terms of capital investment to develop. Among the first purpose-built airliners developed for the CAB sanctioned local-service airlines in the US, the predecessors of the modern regional airliner industry; was the interim and custom-built Fairchild F-27/FH-227's for the needs of these smaller but expanding airlines of the late 1960s.
There were a few other exceptions, generally tailored to more specific roles. For instance, the Handley Page Jetstream (first flight in 1968) was intended for fewer passengers at much higher speeds, displacing smaller designs like the Beechcraft Queen Air. The Fairchild/Swearingen Metro (developed from the original Queen Air through a number of stages) filled a similar niche.
By the 1970s, the first-generation regional airliners were starting to wear out, but there had been little effort in producing new designs for this market. A varied list of light transport aircraft supplanted by newer and more modern 30-seat designs by Shorts with their Shorts 330 and 360 as well as other aircraft manufacturers, replaced and sometimes provided growth to established commuter markets. Additional development came to the regional airline industry with the arrival of some of the earlier De Havilland Canada types such as the Dash 7 delivered in 1978, but this was tailored more to the short-range and STOL (Short Take-Off and Landing) role than as a regional airliner. Feedback from the airlines was fairly consistent, and De Havilland responded with the Dash 8 in 1984, which had economic benefits over the earlier generation machines and was faster and quieter as well.
In the early 1980s, the Dash 8's success sparked off development of a number of similar designs, including the ATR 42/72, Saab 340, Embraer Brasilia and Fokker 50. Consequently, there were a relatively large number of aircraft offered by manufacturers in this sector of the market, pushing older 1950s designs from Fokker, Vickers and others into retirement. Due to the high level of competition, production of a number of these types ceased. Saab AB exited the civil aviation market and wrote its debts off, Daimler-Benz Aerospace "pulled the plug" on Dornier, and British Aerospace ended production of their BAe Jetstream 41 after 100 delivered. By 2006 only the ATR 42/72 models and the Dash 8 remained in production.
Turboprop airliner deliveries are correlated with oil prices with a lag of a few years.[2]
In 2018, 245.4 million two-way seats were offered on turboprop flights, up from 201.4 million in 2009, with 97% of flights below 500 nmi (930 km) and 87% below 300 nmi (560 km), and an average capacity increasing to 51 seats from 44 seats in 2009.
The largest user was Air Canada with 12.7 million seats, followed by Flybe with 10.3 million and Wings Air with 9.24 million.
Canada was the largest market with 30.5 million seats, then Indonesia with 14.3 and the US with 13.4.
The busiest turboprop airport was Vancouver (2.75 Million seats) followed by Toronto Pearson (2.64) then Seattle-Tacoma (2.39).[3]
Embraer claims crossover regional jets are more cost-efficient than current turboprops beyond 200 nmi (370 km), representing 45% of 70-seat turboprops flights in 2017, leading Widerøe to switch to E-Jets E2 except for destinations with short runways and severe weather conditions north of the Arctic Circle or AirBaltic to replace its 12 Q400s by CSeries.[7]
From 2018 to 2037, ATR forecasts 3,020 turboprop deliveries : 630 with 40–60 seats and 2,390 with 61–80 seats.[8]
Hybrid aircraft
As legacy regional aircraft are used on very short sectors like connecting islands, their replacements could be hybrid or electric aircraft.
Hybrid-electric aircraft propulsion remains impeded by energy storage, high-power electric distribution and the lack of certification framework.
ATR Aircraft dismiss a fully electric propulsion as carrying the same payload over the same distances as an 18 t (40,000 lb) ATR 42, current batteries would weigh 21 t (46,000 lb).[9]
Seating on regional airliners tends to be narrow and tight, and passengers typically are restricted from bringing on board carry-on items which would fit without difficulty in the overhead bins of larger aircraft. Often carry-on luggage is collected immediately prior to boarding and placed in the cargo hold, where it can be quickly retrieved by the ground staff while the passengers exit.[citation needed] Compared with bigger planes, many frequent fliers find regional jets cabins cramped and uncomfortable, with a lower ceiling, tight seating and single-class cabins forbidding a first-class upgrade.[11]
Operations
Costs
In the US, major carriers contracts with regional airlines on a per-flight basis regardless of the number of passengers, and the major carrier keep the ticket revenue. These contracts are typically 10-year terms, the regional aircraft operators are certain of their revenue and have to control their costs to earn a return, but they face airline bankruptcies, fleet reductions, and increasing operating costs. Major carriers avoid shouldering losses from regional aircraft operators and competition between regional airlines has grounded many regional aircraft.[citation needed]