EMD F3

Specifications
Specifications
Configuration:;
• AAR	B-B
Gauge	4 ft 8+1⁄2 in (1,435 mm)
Trucks	Blomberg B
Wheel diameter	40 in (1,016 mm)
Minimum curve	23° (250.79 ft or 76.44 m radius)
Wheelbase	39 ft (11.89 m)
Length	50 ft 8 in (15.44 m)
Width	10 ft 8 in (3.25 m)
Height	15 ft (4.57 m)
Loco weight	234,000 lb (106,000 kg)
Fuel capacity	1,200 US gal (4,500 L; 1,000 imp gal)
Prime mover	EMD 16-567B
RPM range	275-800
Engine type	Two-stroke V16 diesel
Aspiration	Roots-type supercharger
Displacement	9,072 cu in (148.66 L)
Generator	EMD D-12
Traction motors	(4) EMD D-17-B or D-27-B
Cylinders	16
Cylinder size	8+1⁄2 in × 10 in (216 mm × 254 mm)

Type and origin
Type and origin
Power type	Diesel-electric
Builder	General Motors Electro-Motive Division (EMD)
Model	F3
Build date	July 1945 – February 1949
Total produced	1,106 A units, 694 B units

EMD F3
EMD F3
	BN #9762, ex-NP #6502, leading the North Coast Hiawatha into Yakima, Washington in August 1971.
Power type
Type and origin
Power type	Diesel-electric
Builder	General Motors Electro-Motive Division (EMD)
Model	F3
Build date	July 1945 – February 1949
Total produced	1,106 A units, 694 B units
Configuration:;
Specifications
Configuration:;
• AAR	B-B
Gauge	4 ft 8+1⁄2 in (1,435 mm)
Trucks	Blomberg B
Wheel diameter	40 in (1,016 mm)
Minimum curve	23° (250.79 ft or 76.44 m radius)
Wheelbase	39 ft (11.89 m)
Length	50 ft 8 in (15.44 m)
Width	10 ft 8 in (3.25 m)
Height	15 ft (4.57 m)
Loco weight	234,000 lb (106,000 kg)
Fuel capacity	1,200 US gal (4,500 L; 1,000 imp gal)
Prime mover	EMD 16-567B
RPM range	275-800
Engine type	Two-stroke V16 diesel
Aspiration	Roots-type supercharger
Displacement	9,072 cu in (148.66 L)
Generator	EMD D-12
Traction motors	(4) EMD D-17-B or D-27-B
Cylinders	16
Cylinder size	8+1⁄2 in × 10 in (216 mm × 254 mm)
Maximum speed
Performance figures
Maximum speed	102 mph (164 km/h)
Power output	1,500 hp (1.1 MW)
Tractive effort	55,000 lb (25,000 kg)

The EMD F3 is a 1,500-horsepower (1,100 kW) B-B freight- and passenger-hauling carbody diesel locomotive produced between July 1945 and February 1949 by General Motors’ Electro-Motive Division. Final assembly was at GM-EMD's La Grange, Illinois plant. A total of 1,106 cab-equipped lead A units and 694 cabless booster B units were built.

The F3 was the third model in GM-EMD's highly successful F-unit series of cab unit diesel locomotives, and it was the second most produced of the series. The F3 essentially differed from the EMD F2 in that it used the “new” D12 generator to produce more power and from the later EMD F7 in electrical equipment. Some late-model F3's had the same D27 traction motors, along with the heavier-duty electrical cables, used in the F7, and were referred to as model F5 by EMD's Engineering Department.

Design

The F3 used a 16-cylinder 567B series diesel engine developing 1,500 hp (1.1 MW) at 800 rpm. The 567 was designed specifically for railroad locomotives, a mechanically scavenged, or "blown" 2 stroke 45 degree V type with 567 cu in (9.29 L) displacement per cylinder, for a total of 9,072 cu in (148.66 L). A D.C. generator powered four traction motors, two on each Blomberg B truck.^[1]^[2] The locomotive could be geared for either freight or passenger service and had a maximum speed of 102 miles per hour (164 km/h).^[3]

The carbodies of the A units varied over the production history of the F3 and are grouped by historians into four phases. Phase I is similar to the F2, distinguished by three portholes on the side and "chicken wire" grilles along the top edge of the carbody. Phase II reduced the number of portholes to two and included wire mesh between the portholes. Phase III eliminated that mesh; Phase IV eliminated the top wire mesh in favor a stainless steel grille.^[4] EMD occasionally referred to the Phase IV locomotives as the F5 but this never became official.^[5]

Eighteen F3s and one F7 were rebuilt for commuter rail service in 1978–1979. The most significant changes was the installation of a separate generator for head-end power. Visually, the side panels with portholes were replaced. The rebuilt locomotives were designated FP10.^[6]

History

The F3 was designed as a follow-up to the successful EMD FT locomotive. The primary changes were threefold: mechanical reorganization of the interior to permit faster construction, an improved prime mover developing 1,500 hp (1.1 MW) instead of 1,350 hp (1.01 MW), and a new main generator (the D12) to handle the increased power output.^[7] After problems developed with the first set of demonstration locomotives, EMD introduced a modified design called the F2 using the generator (D4) from the FT. This limited power output to 1,350 hp (1.01 MW).^[8] EMD built 104 F2s while it worked to eliminate the problems with the D12 generator.^[9] Production of the F3 began in November 1946.^[8]

The F3 was a successful design that encouraged the process of dieselization in the United States.^[10] The Missouri–Kansas–Texas Railroad conducted extensive trials with EMD's demonstration unit against its own 2-8-2 locomotives, following which it ordered 21 F3s. The "Katy" was fully dieselized by 1952.^[11]

Original owners

EMD built approximately 1,800 F3 locomotives: 1,106 A units and 694 B units. Forty-nine railroads purchased A units; of these, thirty-nine purchased B units. The three most significant buyers were the Union Pacific Railroad, Southern Railway, and Southern Pacific Railroad, which purchased 179, 178, and 160 locomotives, respectively. Other major buyers included the Pennsylvania Railroad, Chicago, Burlington and Quincy Railroad, and Atchison, Topeka and Santa Fe Railway.^[7]

Preservation

Several F3s are preserved at tourist lines and museums, including:

Gallery

A unit carbodies of the F3

A Toledo, Peoria and Western Railway F2 (center) with Phase I body (three portholes)
Bangor and Aroostook Railroad F2 with Phase II body
Atchison, Topeka and Santa Fe Railway locomotive with Phase III body
Atchison, Topeka and Santa Fe Railway locomotives with Phase IV body
Metro-North Railroad FP10

Notes

^ Pinkepank (1973), pp. 13, 26, 90–101.
^ Ross (2003), pp. 261, 273.
^ Solomon (2011), p. 81.
^ Cook (2015b), pp. 54–55.
^ Wilson (2017), p. 68.
^ Solomon (2011), pp. 138–139.
^ ^a ^b Cook (2015a), p. 26.
^ ^a ^b Cook (2015a), p. 28.
^ Cook (2015a), p. 25.
^ Solomon (2011), p. 84.
^ Sapp & Hofsommer (1978), p. 8, 12–13.
^ "Locomotives". Alberta Railway Museum. Retrieved November 2, 2024.
^ "Locomotives". Danbury Railway Museum. Retrieved November 2, 2024.
^ "DL&W F3 Locomotive #663". Tri-State Railway Historical Society. Retrieved November 2, 2024.
^ "About Us". Anthracite Railroads Historical Society. Retrieved November 2, 2024.

References

Cook, Preston (Spring 2015). "F Units, T to 9". Classic Trains. pp. 20–35. ISSN 1527-0718.
Cook, Preston (Spring 2015). "Inside an F unit". Classic Trains. pp. 54–55. ISSN 1527-0718.
Pinkepank, Jerry A. (1973). The Second Diesel Spotter's Guide. Milwaukee, Wisconsin: Kalmbach Publishing. ISBN 978-0-89024-026-7.
Ross, David, ed. (2003). The Encyclopedia of Trains and Locomotives. New York: Barnes & Noble. ISBN 978-0-7607-9679-5.
Sapp, Leon H.; Hofsommer, Don L. (March 1978). "The Day Steam Lost". Rail Classics. Vol. 7, no. 2. pp. 8–13. ISSN 0194-9187.
Solomon, Brian (2011). Electro-Motive E-Units and F-Units: The Illustrated History of North America's Favorite Locomotives. Minneapolis, Minnesota: Voyageur Press. ISBN 978-0-7603-4007-3.
Wilson, Jeff (2017). Guide to North American Diesel Locomotives. Waukesha, Wisconsin: Kalmbach Publishing. ISBN 978-1-62700-455-8.